Skip to content
Team Safety

Save the safety alert number

1 min read Updated

Save the safety alert number

Save Onsite Safety Alerts in your phone contacts with these numbers:

  • International: +61 495 099 856
  • Australian local: 0495 099 856

Depending on your region and how your phone matches incoming numbers, you may need both formats saved under the same contact. Use the international format outside Australia.

iPhone: enable Emergency Bypass

  1. Open Contacts → Onsite Safety Alerts → Edit.
  2. Tap Ringtone, enable Emergency Bypass, then tap Done.
  3. Tap Text Tone, enable Emergency Bypass, then tap Done.
  4. Save the contact.

Enable both settings to allow sounds and vibrations for safety calls and SMS when your iPhone or notifications are silenced. Apple’s instructions.

Android: allow safety calls and messages

Menu names vary by phone and Android version.

  1. Open Settings and search for Do Not Disturb.
  2. Open People, Calls and messages, or Allowed exceptions.
  3. Allow calls and messages from Onsite Safety Alerts.
  4. If your phone only offers Starred contacts or Favourite contacts, mark Onsite Safety Alerts as a favourite in Contacts, then allow that group for both calls and messages.

Check each mode you use, including Bedtime, and keep ringtone and notification volumes audible. See Android’s instructions or Samsung’s instructions.

Test your setup

Ask your organisation admin to send a test using Team → Settings → Test Alert.

Test with your usual Do Not Disturb or Focus settings enabled. Confirm that you hear both the SMS and the call, then answer and press 1 to acknowledge.

These contact settings cover SMS and phone calls. If you receive Onsite push alerts, also allow the Onsite app through your Focus or Do Not Disturb settings.

Was this article helpful?